Showing posts with label DryJect. Show all posts
Showing posts with label DryJect. Show all posts

Friday, March 18, 2022

Pound the pavement, Pound sand, You talkin about practice!

 Well, its been quite some time since I've made a blog post so let's get after it. 

POUND THE PAVEMENT

That's been my phrase since I became motivated to change my health regimen at the beginning of December. Thirty pounds lost with a goal of another fifteen over the next few months. Diet generally has changed with throwing wheat out of my intake. Pretty difficult initially when I consumed 6-8 servings a day which a majority of it included bread, donuts and cookies. Active here at the club and on my job but a lack of control and will power with food intake has been an issue forever for me. Hopefully, after discussing potential retirement in just a few years, its time for a permanent change in healthy eating and some regular movement away from the job.


POUND SAND

Over this past week we have brought in over 60 tons of sand to place on and or into our golf greens here at Glen Echo. We contracted with a company to perform the Dryject operation on our greens and begin to do our deep-tine solid aeration using our Verti-drain aerator. We used about 35 tons of sand in completing this operation.


Dryject machine injecting sand with a 3000 psi bead of water and sand into the green about 5". You can see the staff filling 5 gallon buckets of dry sand to load the machine. It takes about 2 buckets or more across the green before it will run out.

3 x 3 spacing after completion. Greens were brushed and rolled after this picture was taken.

We are planning on deep-tine aerating our greens on Monday, March 21st. We do not all of them completed in one day so decided to get some of the greens completed this week. We did greens 15, 17, and 18 on Wednesday and completed greens 5-6, 8-9 on Thursday. The aerating process included the following;
  • Sanding greens ahead to reduce tire rutting
  • Aerate greens
  • Apply soil enrichment fertilizer
  • Blow sand in holes
  • Brush greens and change holes
  • Roll greens and apply an organic fertilizer

Skip apply a heavy coating of sand on the greens before bringing the tractor on the green and punching hole. Takes about 2 loads of sand per green, approximately 2 tons.


Russ using our Verti-drain deep tine aerator on our greens. 3" spacing approximately 7-8" deep with 1/2" tines.

Staff using our new articulating blower and backpacks to move sand into the holes in the greens.

YOU TALKIN ABOUT PRACTICE


Pro shop purchased 8 new mats for long range wet, off season practice area. Our staff power washed the concrete, removed the old mats and installed the new mats. The mats accept a regular tee so you will not have to hit from the rubber tees. We are providing a rubber tee on the mat for anyone who does not want to tee as high as a standard tee. These will also be available for groups to hit from as well during our tournament season. I've included a video regarding the new mats as well as a discussion regarding when will be opening the grass tees. Probably will be at least a month or more. 



Thank you for being a part of this great club. We look forward to the upcoming season of golf here at Glen Echo. Remember you can follow regular daily updates on Instagram, Twitter and Facebook regarding the property we manage for you. I will give you as many details as you can stand.


 

Thursday, March 18, 2021

Drain/Cover, Restrict/Educate and Pound Sand

 Well, it appears we are coming out of winter in pretty good condition generally speaking. All of our turf has not awakened but I am seeing a tinge of green in some of our zoysia areas. We still have to see if some high traffiked areas are damaged from foot and or carts. More on traffic later.  

DRAIN/COVER

The drain and cover part our blog would not have occurred without some dry weather at the first of the month. This allowed us to make great progress on the drainage project from 6 cart path all the way down to 8 cart path. We finished installing of our small drain lines and covered as much as we could in sod. Over 1,800 yards of zoysia and fescue were laid in various areas. The front of 6 green approach and 8 fairway were covered in zoysia. The left rough on 8 and a few strips along the drain line in front of 7 tee were covered. The remaining areas still need some additional soil and a little bit of settling time.


Laying zoysia sod in front of 6 approach. 30 yard rolls.

After adding some additional soil to the left of 6 green Skip is smoothing it out. Still need to add more dirt to the area and more grading once the rain has stopped.

Some finish soil to help smooth out 8 fairway drainage site.

Skip grading on 8 fairway.

We used the forks on the box to break up the soil surface. We then graded with the box blade finished graded with our bunker rake. Our sod producer who was one of the owners of the company complimented us on our finish grade work. Sorry, for some reason didnt take a finish grade picture.

Big roll sodding 8 fairway.

Almost complete, had to bring in more zoysia the next day with the fescue.

Looking from the green side of 8 across the zoysia.

Big roll fescue going in on the left rough.

From 8 cart path looking across toward 7. Just waiting on some drier and warmer weather weather to get this area opened. It will need to firm considerably before we open it for play.
Signage and ropes asking you to avoid these wet areas at the bottom of 3 green.

Looking across 8 near the intersection of 7 tee cart path. With exposed soil above the newly sodded area, we decided to put some hay bales across to catch the soil from washing down on the new sod until we can get it covered with grass. Bottom right foreground are a few stips of fescue we had left over from 8 rough that we laid on solid ground that was not disturbed except from construction traffic ..

RESTRICT/EDUCATE

With the warm weather comes an increase in cart traffic. With increased cart traffic comes the need to restict cart traffic to slow the potential damage to emerging turf which is slow to awaken from its winter slumber. I made some soical media posts regarding cart traffic and the damage that can be caused from excessive wear. I thought it would be important to include it as a part of the blog post for those of you who do not follow our social media accounts.

We have various areas of the course which have springs coming out of them until the summer. There is of course just regular water weeping for short periods of time after heavy periods of rain from slopes into lower lying areas like illustrated below on 3. We have cart signs and ropes in areas on #3, #12 and #13 at this time. There could be other areas that develop over time that we will monitor and might have to place additional restrictions.


3 Fairway directing carts around wet areas next to hill side.

We have a number of holes that have permanenent stakes and decorative rope to force traffic to stay on the path until arriving past the starting points of the fairway. In most cases, carts should be driven on the path and then turn 90 degree into the fairway. Going directly from the teeing ground straight through the rough into the fairway creates signicant wear and tear at the beginning of the rough and fairway. 

Many are using these areas like they are interstate on ramps. 

We understand if you hit a shot that is short of the fairway. Its okay to take your cart to the ball and then move to the fairway. Golfers in carts are kind of like cattle and or dogs, They walk or drive the same trail, walk along the fence the same place without thinking of the damage that is occuring. Excess wear and tear costs money and time in renovation and makes the course not look its best. 

This is a pirme area of concern off of 3 cart path. The path comes straight down the hill and turns to go alongside of the fairway. The area at the bottom of the hill has a tendency to be a little wetter than other areas as well. You should not drive straight through to the fairway. 
No means NO CARTS proceed through this area. Carts should remain on the path and then turn left somewhere past the drain area to go across to your ball laying in the fairway. If its over in the left tree line, you can still cross the fairway at a 90 degree angle from the cart path.
Area at the start of eight fairway is roped off to reduce wear and tear. We have also roped off areas on  four, five and seven. As you might not be aware, this takes time away from 
the mowing team as they are mowing the rough. You have to get off your mower, take the stakes down, mow through and then get back off the mower and put them back in place. At times, a manager will be doing other things and will stop in and help remove the stakes but it takes time. I like the natural look of a course and don't like to have to put up stakes and signs but this is something we are forced to do if we want these areas to look good.

Please assist us this season in reducing cart traffic issues by following a 90 degree rule as often as possible.

POUND SAND

No, were are not saying get lost. We are pounding sand into our greens to improve the overall growth of our greens both above and below surface. Our contractor arrived on Tuesday and used three machines to do this work. Cloudy and wet conditions slowed our process but we were able to complete all nineteen greens by the end of the day. 

Dry sand is injected into the surface of the greens with a bead of water with a force of 2-3000 psi. The work is completed on 3"x3" centers. It takes about 10-15 gallons of sand for each pass on the green. Our staff had to move about 40 tons of sand in 5 gallon buckets at a time to fill the sand hoppers on the units. We normally brush and roll the greens but we had to wait until Wednesday to complete this operation. There area a number of benefits in doing this process;
  • Opens the surface of the greens to improve infiltration of moisture into drier areas and allows wetter areas to dry more quickly
  • Allows sand to be injected into the green mixing with the thatch and assisting in its control
  • Provides new pathways for roots to grow and branch/spread
  • The sand expands out wider than a normal 1/2" aeration hole as it reaches the 4-5" range of depth
  • There is not a lot of excess sand on the surface which is a positive of the process. The remaining sand is brushed into the canapy which improves protection of the crowns of plants and also helps to smooth the greens surface.
Below is an illustration from the Dryject website on how it works. Further down the page is a quick video of the process. We also intend to deep tine our greens to about 8" if the rain ever stops. We might be forced to do this over a number of days and do it when we are open. We will do everything we can to not inhibit play  I wll keep you informed as time goes by when this process will begin. This double aearation process is necessary to help improve the drainage in our greens.
























Friday, March 27, 2020

Sand, Holes, More Sand, More Holes and Project Updates

During this most difficult time, your grounds staff is preparing the course for what we hope will be some normalcy in the future. Our seasonal/summer staff will not be added until our club is back in full operation. We are lucky that our staff on hand including managers has over 175 years experience in working courses with a majority of that being at Glen Echo.

As weather improves, we will be finishing the project that was started last fall which includes zoysia around the back of 5 green and grassing the 6th green complex with zoysia. This funding is provided through the foundation and has already been allocated for this project from 2019. We hope to have the tee open sometime around May 1st if the weather cooperates. I would expect to have the sod completed around the greens by May as well.

We had initially planned to renovate the 4th and 12th tee complex but under the current situation it was determined to postpone this project. We have not determined a new date but it will be no earlier than October 1st since member guest is at the end of September. 

This past Monday, the staff was involved with our contracting company @DryjectofTennessee to aerate our greens. Our spring process involves the Dry-ject system which shoots a stream of water and sand at 3,000 psi into our greens staring from the surface and ending about 5" into the existing sand profile

Out staff’s involvement was to load 5 gallon buckets of dry sand into the aeration machine hopper. We used about 30 tons of sand. That is too many buckets of sand to count over the 10 hour period the operation took to complete. We also brushed the greens once they dried and they were rolled the next day since we ran out of time.

Hopper area where kiln dried sand is dumped. Sand is released through the holes and is then injected down into the green.

Chad Gamble, owner operator. Been a tough season for his business with cancellations beginning to fill his phone from our existing health crisis.

We hope to do a deep tine aeration of our greens early next week. This will consist of the green being covered in sand and then a half inch tine will push through the green surface to about 8” of depth.Our greens do not have modern drainage and must drain through our 4-6" sand profile and through the holes that are filled with sand. Deep tine aeration has been a life savor for our greens assisting in water removal from surfaces. Modern green architecture consists of an elaborate drainage system consisting of 10-12" of sand, gravel and drain tile. Our 9th green is the only one on property with this type of system.

The staff have been replacing damaged heads around our greens. The new system has been in the ground now for 13 seasons. Mowers and equipment going over top of them break the outer top casing which can effect the way the head operates. Our mower can also catch the corner of the head and damage it further.
You can see this head is missing almost 1/2 of the top part of the casing which rests on the soil/sod surface.







Russ working on a head at the corner of 4 green. Jason was involved in this production as well. Hopefully will be finished today.

























Monday, March 18, 2019

Spring Greens Aeration 'DryJect'



Our spring greens aeration was completed today using a process called DryJect. We contracted with DryJect Tennessee who brought two machines to Glen Echo to do the work. The following process was used for all 19 greens at Glen Echo. Our staff did an excellent job in getting this operation completed today!
  • Greens were mowed to create a smooth surface since we will not be mowing for the next few days to allow the sand to settle into the canopy.
  • 5 gallon buckets of sand were placed in the hopper as it crossed the green and were continuously added as it crossed back and forth across the green until the green was completely aerated.
  • The machine uses a bead of water shot at 3,000 psi into the surface of the green. Simultaneously sand is injected into the water. The sand fills the space created in the green subsurface to a depth of 4-5".
  • Once the sand dried on the green surface, the greens were brushed and holes were changed.
  • Tomorrow, we will rolling the greens to help smooth out any imperfections.
We expect the greens to heal over the next 10-14 days. The holes are completely covered and should not create a great deal of disruption in ball roll out.

This process improves water infiltration/drying of wet areas, root growth, thatch control, gas exchange, smooths the surface of the greens with the excess sand that was brushed around the surface, and helps to protect the crown of the plant which is the area where the roots grown down and leaves grow up.

Trailer used to hold sand
Closer view of the process on each green.

Aerial view of the operation on 15 green. Sand at each side of the green. About 25 tons of sand was used today.







                  

 Sand on top of the machine. The clear tubes allow the kiln dried sand to be injected under the machine and into the green subsurface. The process taking approximately 30 minutes per green more or less.


https://www.youtube.com/watch?v=XXLvEbNEi5c

Friday, February 22, 2019

Between Now and April 1st We Must All Do Our Part

This has been one winter that has forced many of us to leave for warmer climates or dream of warmer climate if you haven't been able to leave the city. We've not been able to open the course on warmer days because of frozen conditions within our greens. We finally opened today for the first time in many weeks. We could have some additional course closed weather days before we begin to mow a great deal but they should be for much shorter intervals than what was experienced over the last month or so.There are a few things that our golfing members could assist us during the next few weeks until the turf begins to firm up and grow and we are fully staffed in April
Middle of 6 White tee concentrated divot wear. Please use the edges when possible.
  • Greens will be very soft and repairing ball marks would be helpful.
  • Divots on tees and fairways could be large due to the soft, wet conditions. Place your divots back in place, even if it breaks apart. Also, step down your depression which will reduce the exposure of roots to cold and or windy conditions. Your competitors would appreciate it as well in case a ball would roll into your smaller stepped down divot. Of course this is helpful during the growing season as well.
  • Tee markers will be placed back on the tees in a few weeks but in the mean time use areas of the tee that appear more full of grass, especially the sides. Please don't place your ball in the middle of a heavily divot spot to make one more divot. Place your tee in an area of less damage.
  • Carts will probably remain on the paths for the near future and I would encourage that you leave all wheels on the path instead of pulling partially off the path. I know if you are in a group with 2 carts, you have to go around a parked cart. If you do pass, it is always best to go on the side of the path away from the fairway so you do not potentially damage rough in the close rough/fairway area. Certain areas of the course are wetter than other areas, especially bottoms of fairways. It might be wise to wait for the group to move instead of burying your cart in a wet spot at the bottom of #12 cart path.
  • Driving ranges are on mats through at least mid-April or later. Please refrain from hitting off the grass tee. If you must hit off grass, please go to another range until we can get our grass growing and open. I don't like to hit off mats as well but its what we have to do since our grass is not actively growing until late April. The less damage we do to our grass now, the quicker we can open in the spring.
Olympic Flame troubleshooting
There is a great deal of work for our staff to complete before we reach the month of April as well. Not a complete listing but some of the main work.
  • Finish all the equipment repairs for tees, driving ranges etc.
  • Clean up of all equipment and checking carts for the season
  • Continued tree removal and tree trimming.
  • Rake and clean up gum balls and other debris
  • Blowing remaining leaves that have dropped and finishing fence leaf removal.
  • Monitoring seed head production on greens and spraying.
  • Dry-ject(aerate) greens March 18-19 45 tons of sand.
  • Aerate rough and root prune trees
  • Finish applying weed grass post and pre-emergent to fairways. tees. Walk spread pre-emergent around greens and apply by fertilizer hauler pre-emergent into rough areas.
  • Repair greens surrounds with sod and other areas of course with sod and seed.
  • Clean up tree stump grindings/sod
  • Repair driving range netting by installing new telephone pole.
  • Changing holes, moving tees a couple times a week as needed.
  • Repairs to outside areas around the clubhouse including walkway lights, patio lighting, pool clean up and lawn areas.
  • Asphalt repairs as needed.
  • Growing all of the plants for this season and Becky will be busy cleaning up beds and planting spring pots around the clubhouse.
  • Clean up in and around field bar]
  • Rebuilding 2 tee
  • Rebuilding the greens nursery
  • Grass part of dam on #9.
  • Divot filling
Repairing and painting driving range bag stands. These were all home made by the staff a couple of years ago.
As you can see, we all have responsibilities that are important for the overall well being of our grand old golf course. We of course first rely upon you to come out and visit us, first and foremost but while you are here, some player etiquette in regards to the course is always appreciated.

Monday, March 19, 2018

Aeration of Greens Dry-Ject Week

Spring is upon us so it's time for some inputs to our greens to help bring about strong and vigorous plants that will thrive during the summer season. Our first application is a process called Dry-Ject. This process shoots a bead of water with sand penetrating the green surface and going to a depth of 4-5". This process will:

  • Stimulate root and shoot growth,
  • Improve surface drainage and water penetration
  • Dilute thatch and build a mat layer which is a proper combination of sand and diluted thatch which assists in proper sized ball marks on our greens. Too much thatch, soft greens and too little can provide no protection for growth area of the plant. See below
  • Provides additional sand on the surface of the greens to smooth blemishes and covers the crown of the plant. The crown is the key growth area of the plants where's shoots grow up and out and roots grow down. If this area becomes damaged shoot and root growth of the plant will be disrupted
I have a video of the process with some discussion. Brushing of the greens and a little ball roll out demo.






Monday, March 12, 2018

Grounds Work, Here Comes Spring

Greens staff, small and mighty have been pretty busy over the last few weeks with some inside work challenging them along with some work on the course. It had been decided to redo the lower level lockers in the Ladies Locker Room by painting the outsides of each locker and removing all layers of paint off of the doors including the inside which was severely peeling. We first thought we could sand blast the lockers ourselves but after the 1st 20 locker doors took almost a week to complete we gave up Sand and dust was covering almost everything in the maintenance building as well so decided to find a company to do the paint removal of the remaining 80 doors. Some examples of the work are below.







Finished Product
We then started sanding some of the rougher areas on the main parts of the lockers that we did not remove and then started hanging the doors and painting over the last couple of weeks. Some of the lockers had to have their locks changed due to back up keys not being available. The staff have a majority of the work completed in the main locker area and are now trying to finish in the small room off of the pool hall.

FAIRWAY DORMANT HERBICIDE APPLICATIONS
Work outside has been ongoing with a number of projects taking place. During the end of January or early February, most staff in the St. Louis area spray RoundUp (a non selective herbicide which kills poa annua, knot-weed) and pre-emergent (Crabgrass and Goose grass control Herbicide) that prevents these weeds from growing. Areas sprayed include our zoysia grass fairways, tees and specific green surrounds like # 1, #2, #3. You have to spray these when the turf is dormant so you don't damage green actively growing turf with Round Up which can injure green or actively growing turf.

Poa beginning to change colors and die on #10

How do these products work? Its interesting how Poa will take in the chemical on warmer and sunny days in February. There are additives within Round-Up that allows the chemical to stick on the plant and also enter the plant which are key factors for us during the winter season. The Crabgrass product attaches itself to the soil, it is very non-soluble and will stay into the soil for months creating a barrier and or preventing the full germination of the weed seedlings. Once the turf becomes active and growing, the combination of the initial control and the overall thickness and strength of the Zoysia grass which helps to shade and reduces competition of the weed plants to germinate further.

GREENS AERATION
Greens have been mowed at our near regular season height as growth occurs. We will be aerating on March 19th using the process called Dry-Ject. This is contracted out but heavily depends upon the  involvement of our staff. As the 2 units go across each green, our staff must dump 5 gallon buckets full of sand into the holding container. The sand is incorporated into the green with a 3000 psi stream of water that injects it up to 5" into the green profile. Light brushing and rolling afterward and the greens are then ready to grow in and heal over the next few days. We are evaluating if we will do a deep-tine aeration after the other process is completed. Normally we do this as well.




SCIENCE GROWING DEGREE MODELS FOR CHEMICAL CONTROL OF PESTS
Over the years, we use a scientific temperature models(Growing Degree Days GDD) to help us determine applications that we use to reduce the amount of poa annua seed heads that germinate which can effect ball roll out both in length and smoothness. These models can be used as well with insect control products, fungicide applications, and other herbicide products. The models have early, target and over for application rates based upon a accumulation of growing degree days. These are guidelines for us to follow, with some products or applications they work well but with other products its problematic at best. Poa annua seed head applications are one of those problematic models. Last year's model had us spraying around February 24th and 2016 had us spraying around March 8th based on the models. This year the models are trending for an application about now which is March 12th. These models assist us in hopefully getting maximum efficacy(desired intended result) with the products we use.

The staff is in the process of getting course amenities out such as ball washers, benches, trash cans and etc as we move toward more active golfing weather. Water coolers will be placed on holes this next week. Clean up of gumballs, leaves and other things are happening as well including some dead tree removals as staffing levels increase.

#9/GLEN ECHO PARK STORM WATER DRAINAGE WORK BY MSD
Also, a contractor is working on new storm drainage from Glen Echo Park which will drain water into 9 lake from the subdivision. This work is being completed in a MSD project to reduce the amount of storm water that enters the sanitary sewer system flooding areas down stream in the  Wilson Creek area in U-City.  Some of have you have witnessed water pouring out sewer lids on our property which runs along the lake system at Glen Echo. The contractor is responsible for doing all the work and clean up in the area when finished. We will capping off our irrigation in that area which is rarely used.  This work should be completed over the next few weeks.


TEE RENOVATION
We have a tee project planned for the end of March/first of April where we will rebuild the 5th main tee and will be leveling and grassing the left tee on 14 with Zoysia. This effort will include stripping the old grass from the tee. A contractor will till the tees and then level them for surface drainage using a Laser-Leveling tractor and grading machine. The staff will then grass tees with zoysia. Hopefully, the tees will be open for play around May 1st or so depending upon weather. Pictures forthcoming as the work begins.

Until next time, hopefully will see you out on the course!!

Thursday, March 9, 2017

Spring Aerations, Here They Come

This season we will be doing the DryJect Aeration process from our contractor. Scheduled initially for this Sunday PM and next Sunday PM, the dates were moved due to weather concerns.



We will be completing this process on Wednesday March 15 and Thursday March 16. I don't like to do this work during the work but we had no choice or wait until the end of April which I do not want. It is a pretty non-evasive process but we will have to have you go around the holes that we are working. We will have 2 units working. Takes about 45 minutes per green or so.

Below is the link to last years work. We usually just brush the greens and roll them if they are dry enough and they are ready for play.

http://geccgcm.blogspot.com/search/label/DryJect

Later in the month we will be performing our deep-tined areation which will help us drain water deeper through our profile as needed, especially through the earthen layer that rest 6" below ground.

I will make another post in the next few days catching you up on other work the staff have been performing.

Tuesday, March 29, 2016

DryJect Aeration Process at Glen Echo

Yesterday was the second aeration completed to our greens in a week's time. We contracted with DryJect of Tennessee to inject sand into our greens.

The process involved about 20 tons of sand, 800 buckets full of sand hand loaded into the machine by our staff. The machine uses a 3000 psi bead of water injecting the sand into holes which were over 1/2" in diameter approximately 4" deep spaced about 3"x4".

We had 2 units and 8 of us working with the 2 units loading sand into buckets, into the hopper and letting it fly. As the greens began to dry, we brushed them to help smooth the sand out that had been pulled up from last weeks aeration plus excess sand from the work performed yesterday. The process uses water which of course will pull up any existing sand which requires a brushing to smooth back out. We are in growth regulation time which slows the healing process but its still better than a million seed heads which we would be facing if we weren't applying this spray. I think a good trade off in the end, especially since it is very early in the season.

We've placed about 60 tons of sand in and on our greens the last 9 days.

Over the next seven months, we will be performing at least five venting procedures on the greens involving small needle tines and hydrojecting(water) to help them survive the season. These are very minor in nature and do not create some of the disruption you've seen over the last week. By the way, this past weeks work is absolutely necessary for many of these greens which are over 100 years old to survive the stress of a St. Louis summer.
Staff had to keep sand in the hopper continuously. 3-4 bucket fulls per pas on the green.

9th green. A little more sand visible because the unit uses water and as it rolls along, it picked up sand from the surface of last weeks work.

After brushing. Still some sand on the surface but we expect that this time of year after aeration. It also helps to smooth out some imperfections this time of year. 

Most of the new aeration holes are a little difficult to see because the hole is not as large of an opening on the surface as the normal coring tine but explodes out as it entered the sand profile.

Alphonso poring sand in the hopper with Chad Gamble, owner of  DryJect Tennessee working his way across the green.

Finished product with some dyed sand showing the spread and depth.

I've been informed that as the water begins to shoot into the surface, sand is vacuumed through the white hose and into the ground.


https://youtu.be/wKd2hxBrtbk